Cap-Band Oil Filter Wrench - Fits 4-5/16in to 4-3/4in Spin-On Filters - Replaces 54200 210.5025

Get a seized spin-on filter off without punching a screwdriver through it using this Cap-Band Oil Filter Wrench distributed by FleetPro Parts & Tires. It grips filters measuring 4-5/16 in to 4-3/4 in outside diameter, which is the small end of the heavy-duty range, and it drives off a standard ratchet so the pull stays square to the filter instead of tearing the can. A filter that will not break loose turns a twenty-minute oil service into an hour of skinned knuckles and a mess on the shop floor. We stock these heavily right here in our Hanover Park, Illinois warehouse to ensure lightning-fast shipping for fleets, diesel repair shops, and owner-operators nationwide.

Square Grip, No Crushed Cans: The Cap-Band Filter Wrench Advantage

This is a cap-band style wrench, so it cups the base of the filter and tightens around it as you pull. That spreads the load over the whole circumference instead of concentrating it on two contact points the way a strap or a claw does, which is what saves the filter can from collapsing and leaving you with a crushed shell still threaded onto the housing. The 4-5/16 in to 4-3/4 in range covers the smaller spin-on lube and fuel filters, so check the diameter of the filter on the truck before you order.

It is a universal tool rather than a make-specific one, and it is built to Automann Fleet Standard grade. Both engine oil and fuel filter service are in scope, on trucks, trailers and shop equipment alike, so one wrench covers the filters you turn most often. Keep it in the service truck with the filters it fits.

At FleetPro Parts & Tires, we know the filter you cannot remove is the one that ends the job. This wrench is a direct replacement for the highly searched industry number 54200.

Vehicle Fitment & Compatibility

This universal cap-band filter wrench is intended for the following commercial applications:

• Make/Model: Universal - all Class 8 trucks, trailers and shop equipment
• Filter Range: Spin-on filters 4-5/16 in to 4-3/4 in outside diameter
• Service: Engine oil and fuel filter removal and installation
• Component Group: Filtration / Filter Service Tools
• Verification: Measure the outside diameter of the filter before ordering

Direct Replacement & Cross-Reference Numbers:

This filter wrench serves as a direct replacement for the following part numbers:

• Interchange: 54200
• Automann Distributor #: 210.5025

Technical Specifications

• Component Type: Cap-band oil filter wrench
• Filter Range: 4-5/16 in to 4-3/4 in outside diameter
• Application: Universal
• Grade: Fleet Standard
• UPC: 889626660177
• Product Level: Fleet Standard Aftermarket
• Brand: Automann (Distributed by FleetPro Parts & Tires)