Hub Cap Gasket 8-Pack - 6-Bolt 5-1/2in Bolt Circle Fiber - SKF 453795 Stemco 330-3009 180.CR453795-8

Seal the hub cap joint properly with this Hub Cap Gasket 8-Pack distributed by FleetPro Parts & Tires. Each gasket seals the joint between the hub cap and the hub body so lubricant stays in and road grit and water stay out. Reach for one when you see oil weeping at the cap flange, grease tracking onto the wheel, or any time a cap comes off for a seal or bearing job. Buying eight at a time is what keeps a crushed gasket from going back on a wheel end because the shelf was empty. We stock these heavily right here in our Hanover Park, Illinois warehouse to ensure lightning-fast shipping for fleets, trailer repair shops, and owner-operators nationwide.

Eight in the Box: The 5-1/2in Bolt Circle Hub Cap Gasket Advantage

These are 6-hole gaskets on the larger 5-1/2in bolt circle, with 5/16in bolt holes, a 4-3/4in inner diameter and a 6-1/4in outer diameter. The holes are pre-punched for a direct fit on standard 6-bolt caps in this bolt circle, so there is no trimming and no guessing which way the gasket goes on.

The material is a fiber composite that conforms to the hub face as the cap bolts are brought down. Fit a fresh gasket whenever the hub cap is pulled for lube service or seal replacement, so the wheel end seals clean instead of weeping again a week later. These match Stemco and SKF style caps using this bolt pattern, on drive and trailer axle positions.

At FleetPro Parts & Tires, we know the cheapest part in a wheel end is the one that keeps the expensive parts alive. This 8-pack is a direct replacement for highly searched industry numbers including SKF 453795 and Stemco 330-3009.

Vehicle Fitment & Compatibility

This hub cap gasket pack uses a universal design intended for the following commercial applications:

• Make/Model: Universal - Class 8 trucks, tractors and commercial trailers
• Position: Drive and trailer axle wheel ends
• Mounting: 6-bolt, 5-1/2in bolt circle bolt-on hub caps
• Cap Styles: Stemco and SKF style caps using this bolt pattern
• Component Group: Air Brake & Wheel / Wheel End Seals & Bearings

Direct Replacement & Cross-Reference Numbers:

This hub cap gasket serves as a direct replacement for the following part numbers:

• SKF Interchange: 453795
• Stemco Interchange: 330-3009
• Automann Distributor #: 180.CR453795-8

Technical Specifications

• Component Type: Hub Cap Gasket
• Bolt Pattern: 6-hole
• Bolt Circle: 5-1/2in
• Bolt Hole Size: 5/16in
• Inner Diameter: 4-3/4in
• Outer Diameter: 6-1/4in
• Material: Fiber composite
• Pack Quantity: 8 gaskets
• Weight: 0.25 lbs
• UPC: 889626410888
• Product Level: OEM
• Brand: SKF (Distributed by FleetPro Parts & Tires)