King Pin Kit LH/RH - Freightliner Alliance Model 3 Needle Bushings 10-14K Axles - 6073300019K 607-330-00-19K 460.538

Take the play out of the steer axle with this complete King Pin Kit distributed by FleetPro Parts & Tires. It carries the pins, bushings, shims, bearings and seals needed to rebuild both steer axle knuckle joints on a Freightliner Alliance Model 3 axle, and it is the fix for the king pin play that shows up on a PM inspection as wander, looseness at the wheel and uneven steer tire wear. Manufactured by Automann to Fleet Standard specifications, this kit is stocked right here in our Hanover Park, Illinois warehouse for lightning-fast shipping to fleets, diesel repair shops, and owner-operators nationwide.

Tight Steering Again: The Alliance Model 3 King Pin Kit Advantage

This kit is built around a 9.212 in pin at 1.771 in diameter, the size the Freightliner Alliance Model 3 10-14K axle uses, and it runs needle bushings rather than plain bushings so the knuckle carries its load on rollers instead of sliding on a bearing surface. Lower friction at the knuckle means steering effort stays where it should as the miles pile up.

Both sides come in the box. The kit contains 460.523B and 460.539B, the left hand and right hand halves, so the axle gets done in one visit instead of ordering sides separately and doing the job twice. Shims 460.S17B and 460.S17F can be used with this kit. As with any king pin job, machine or ream the bushings to fit before assembly.

At FleetPro Parts & Tires, we know a steering job is only right when the part is right. This kit is a direct replacement for highly searched industry numbers including Freightliner 6073300019K, 607-330-00-19K and 6073300119K.

Vehicle Fitment & Compatibility

This heavy-duty aftermarket king pin kit is intended for the following commercial application:

• Make/Model: Freightliner Alliance Model 3 steer axles
• Axle Rating: 10-14K axles
• Position: Steer axle knuckle joints, LH and RH
• Component Group: Steering / King Pins & Bushings
• Installation: Machine or ream bushings to fit

Direct Replacement & Cross-Reference Numbers:

This Automann king pin kit serves as a direct replacement for the following part numbers:

• Freightliner Interchange: 6073300019K, 607-330-00-19K, 6073300119K
• Automann Distributor #: 460.538

Technical Specifications

• Component Type: King Pin Kit, Needle Bushings
• Pin Length: 9.212 in
• Pin Diameter: 1.771 in
• Fits: Freightliner Alliance Model 3, 10-14K axles
• Contents: 460.523B + 460.539B (LH and RH)
• Shims: 460.S17B / 460.S17F can be used
• Weight: 19 lbs
• Product Level: Fleet Standard Aftermarket
• Brand: Automann (Distributed by FleetPro Parts & Tires)