Back to Ratchet Straps
Browse
- Home
- › CARGO EQUIPMENT
- › Straps
- ›Ratchet Straps
- › Over-the-Tire Ratchet Strap 2in x 10ft - 3 Wire J-Hooks & Sliding Rubber Blocks 1,667 lb WLL FL011
Couldn't load pickup availability
Tie a car down the right way with this 2in x 10ft over-the-tire ratchet strap. Straps that pull on the suspension let a vehicle bounce and work loose over a long run, and a block that will not stay put slides off the tread the first time you hit a frost heave. This assembly answers both, with 3 wire J-hooks, sliding rubber blocks and a 1,667 lb working load limit on 5,000 lb rated webbing. We stock these heavily right here in our Hanover Park, Illinois warehouse to ensure lightning-fast shipping for car haulers, towing and recovery shops, and owner-operators nationwide.
The three-point anchor setup pulls tension from the deck instead of the suspension, so the car sits on its own springs and stays put instead of pumping up and down for four hundred miles. The textured rubber blocks slide along the webbing to bite the tread wherever the tire sits, which is what keeps the strap planted on any tire width — cars, pickups and vans off the same deck.
Gold chromate plating on the ratchet and hooks fights the rust that kills tie-down hardware on an open deck, and the long handle gives you enough leverage to crank real tension without a cheater bar. The assembly meets DOT specifications, and each strap weighs 4.6 lbs. Run at least four straps per vehicle, one per corner, driver side LH and passenger side RH alike.
At FleetPro Parts & Tires, we know an auto-transport load is only as good as its weakest corner. This tire strap carries the 1-Year FleetPro Warranty, and at this price there is no reason to run a bent hook or a chewed-up block another week.
This over-the-tire strap is intended for the following auto-transport applications: