Back to Oil Filters
Browse
- Home
- › PARTS
- › FILTRATION
- ›Oil Filters
- › Fleetguard Secondary Oil Filter - Volvo D13 & Mack MP8 2017+ - Replaces Volvo 21707132 Baldwin B7409 LF17502
Couldn't load pickup availability
The Fleetguard LF17502 is the spin-on secondary lube filter that finishes the job the full-flow filter starts on a Volvo or Mack heavy-duty diesel. It polishes the oil the primary passes, holding back the soot and fine wear metal that turn a healthy bottom end into a rebuild. It is the filter commonly supplied in the Volvo D13 and Mack MP8 full-service oil-change kit alongside its full-flow companion. We stock these heavily right here in our Hanover Park, Illinois warehouse to ensure lightning-fast shipping for fleets, diesel repair shops, and owner-operators nationwide.
The cellulose media is rated 16 micron (c) at 98.7% efficiency, and the can is built to the engine's own envelope: 1-3/8"-16 UNF, 2B thread, 10.24 in (260 mm) height, 4.31 in (109.6 mm) outer diameter, and a 3.70 in / 4.02 in gasket. A minimum hydrostatic burst rating of 246.5 psi means the housing takes a cold-start pressure spike in stride. There is no pressure relief valve in this filter, which is correct for the secondary position on these engines.
At FleetPro Parts & Tires, we sell the filter that came off the line, not a lookalike. This is a genuine Cummins Filtration part that replaces Volvo and Mack OE 21707132 and supersedes the earlier Fleetguard LF3654, and it is a direct replacement for highly searched industry numbers including Baldwin B7409, Donaldson P550425, WIX WL10106, Luber-Finer LFP8642, NAPA 400106, Carquest 96322 and Hastings LF675. It is typically installed with Fleetguard LF17503, FS19765 and FF42128NN for a complete D13/MP8 service.
This OE-grade secondary lube filter is intended for the following commercial applications:
This Fleetguard lube filter serves as a direct replacement for the following part numbers: